Technical FAQs

Ask a Question

What is suffix S101 on an LC2D1201* S101?

Product Line:
Tesys D line Contactors
This was the standard reversing pre-TeSys D-Line contactor with A1 terminals wired together. Each contactor had 1 N.C. auxiliary contact. The mechanical interlock was standard design with no additional electrical interlocks. Coil voltage must be known to select proper replacement. Reversing power connections were also standard.

Replacement: Use standard LC2D12*
* = Voltage Code

CTA-ID : 2008039
Was this helpful?
What can we do to improve the information ?