Technical FAQs

Ask a Question

OHF overheating fault on the ATV61 and ATV71 drives.

Overheating OHF fault on the ATV61 and ATV71 drives.

Product Line:
Altivar ATV61 and ATV71 drives


Drives thermal temp has exceeded 118%

Check to see if the cooling fans are running.  Check for blockage on the top of the drive to see if cooling fans are being restricted.
Menu 1.2 monitoring check the drives thermal state as the drive starts to warm up is the signal jumping around which could tell us the thermal sensor is inoperative.
The drives thermal should be 100% and below in normal running conditions.
Contact your drives product support group for more assistance if needed.

Was this helpful?
What can we do to improve the information ?