On a TeSys D or TeSys IEC relay, is there a top mounting provision that will allow you to relocate the A1 & A2 terminals from the right side to the top?
TeSys D LC1D09-LC1D65A, TeSys IEC relay CAD**
The current TeSys IEC D line contactors ( LC1D09-LC1D65A) and the TeSys IEC Relay (CAD**) have A1 and A2 Terminals located on the right side of the device. To relocate the A1 & A2 Terminals, consider using the LAD4BB top-mounting wiring accessory. Please note this device can only be used on the D line contactors or the IEC relays that are provided with AC coils. A mounting accessory for units with a DC coil is not available.