Technical FAQs

Ask a Question

What should I check for if I have no display on an Altivar drive?

Issue:
What should I check for if I have no display on an Altivar drive?

Product Line:
Altivar Drives

Environment:
All serial numbers for Altivar Drives

Cause:
N/A

Resolution:
Perform this basic steps
Check line voltage by measuring L1, L2, L3 on the drive itself
Check DC Bus by measuring PA to PC and PO to PC  (most drives)
Reseat terminal card (ATV61/71 only)
Remove cable from Modbus port if present
Check +24 to COM and +10 to COM (DC voltage only)


 

Was this helpful?
What can we do to improve the information ?