Technical FAQs

Ask a Question

What will cause a CLr fault on the ATV212?

Issue: 
What will cause a CLr fault on the ATV212?

Product Line:
ALTIVAR 212

Environment:
All models
 
Cause:
Troubleshooting

Resolution:
CLr [Reset active] is a status which is displayed after the STOP/RESET key is pressed while a detected fault is displayed. It indicates that the cause of the detected fault has cleared and the fault status can be reset. Press the STOP/RESET key again to clear the detected fault.  This type of fault reset only applies when in Local mode or in Remote mode with CMOd=1(HMI).  It also only applies to the following faults:
Was this helpful?
What can we do to improve the information ?