What are the repair parts for a CHU366AWK Series E5 (or E05) Heavy Duty Safety Switch?
Issue: Previous Design Repair parts
Product Line: Canadian Heavy Duty Safety Switches
Environment: Repair Parts
Resolution: NOTE: This is a Non-Fusible Switch so it does NOT have a Separate Load Base Assembly.
The parts listed here are the only field replaceable parts. Line-Load base assembly - 4055218650 (3-required and arc suppressor assembly is not included see below) Arc suppressor assembly - 4051270850 (3-required) Lug assembly - 4405044601 (4 required per base assembly, 2 for the Line and 2 for the Load connections) Line base phase insulator - 4055219301 (2 required) Line-Load base mounting screws - 40206-009-01 (3 required per base assembly) Handle assembly - 4051217251
Handle assembly mounting screw and washer - 2140122242 (Screw 2 required) and 2370100220 (washer 2 required) Door thumb retainer - 4405043301 Door thumb screw - 4405043401 Handle knob kit - 40283-435-50 (the black & red knob at the end of the handle)
Cross Bar Insulator - 4055217801 ( 1 required the insulator is Red, approx. 8.85" in length and 1.46" wide)
Cross Bar Insulators - 4055217701 (2 Required, these insulators are Red, approx. 4.16" in length and 2.5" in width)