Technical FAQs

Ask a Question

How to calculate counter frequency in Scadapack3xx?

Using Flow block in Telepace Studio Software:
Frequency = Flow rate/K factor

set K factor =1;
use Counter CH0 register = 30009;
Input type = 32 bit counter;
Rate period = Per second;

To get the flow rate in the Flow block:
Flow rate status and data block register +1 and +2 = flow rate (floating-point). These registers contain the flow rate in engineering units based on the K-factor and rate period provided (same for every flow rate register.)

Since the K factor is equal to 1.
Frequecy = Flow rate
Was this helpful?
What can we do to improve the information ?