Technical FAQs

Ask a Question

Why is the ATV212 drive not follow my ramp time that was set and instead go to full speed very quickly?

Issue:
Why is the ATV212 drive not follow my ramp time that was set and instead go to full speed very quickly?

Product Line:
Altivar 212

Environment:
All

Cause:
N/A

Resolution:
Press mode to go to AUF.
Arrow down to ACC and enter.  This is the ramp up time the drive will follow upon run command.
Go into AU1 and enter.  Set it to 0 to disable auto ramp and follow your ramp up time.
Set AU1 to 1 to allow the drive to follows its own auto ramp up time.
Was this helpful?
What can we do to improve the information ?