Technical FAQs

Ask a Question

Video: How to install, replace, and remove the Everlink lugs in a Powerpact B-frame breaker

Issue:
How to install, replace, and remove the Everlink lugs in a Powerpact B-frame breaker
 
Product Line:
Powerpact Molded Case Circuit Breakers
 
Environment:
B-frame Circuit Breakers
 
Resolution:
First, take off the green terminal cover by sliding something flat into the notch and popping it off. Then, slide the flat object under each tab of the lugs on the back of the breaker and push up. Once loosened, the lug cover should come off, and the lugs would then be able to slide right out of the breaker. They can then be replaced, and the lug cover can be pushed back on until it clicks into place, and then do the same with the green terminal cover. For further instruction, see the video below:

Was this helpful?
What can we do to improve the information ?