Technical FAQs

Ask a Question

ATV312 drive is stuck running at low speed and will not ramp up. 

Issue:
ATV312 drive is stuck running at low speed and will not ramp up. 

Product Line:
ATV312

Environment:
Al 

Cause:
Drive is not getting a speed reference to ramp up

Resolution:
First check to see if the drive is in local mode by error. 
Check to see if the drive is programmed to look at the analog input speed reference that you are  using. 
Check to see if the analog signal is making it to the drive so that the drive can follow the speed signal. 
Check to see if there is a logic input assigned as a preset speed and maybe the preset speed set lower than your low speed.
Check Low speed and high speed settings in the SET menu under LSP and HSP. 




 
Was this helpful?
What can we do to improve the information ?