Technical FAQs

Ask a Question

Video: How to install LV426974 3p Everlink with control wire terminal lug kit onto Powerpact B-frame

Issue:
How do you install the three pole Everlink with control wire terminal lug kit (LV426974) on a Powerpact B-frame circuit breaker?
 
Product Line:
Molded Case Circuit Breakers 
 
Environment:
B-Frame Circuit Breakers 
 
Cause:

How do you install the three pole Everlink with control wire terminal lug kit (LV426974) on a Powerpact B-frame circuit breaker?
 
Resolution:
 

Remove the green connection system cover (put a screwdriver or similar flat tool into slot in the connecter and push out) and the currently installed lug kit (put a screwdriver or similar flat tool into the gap between the lug kit and breaker on the back, and push the lug kit out). Then install the kit by sliding the notches on the kit into the grooves on the back of the breaker and pressing down on the lug kit until it clicks into place. Then place the labels provided with the kit over the side and front faces of the breaker over the previous lug information. Then reinstall the green connection system cover back onto the breaker. For more information, see video below or the attached instruction bulletin:

[video placeholder]
Was this helpful?
What can we do to improve the information ?