Technical FAQs

Ask a Question

Video: What Filler Plate is used and how does it install, to fill the main circuit breaker opening in QO and Homeline, Low Amp, convertible main load center covers?

Issue:

Product Design Features

Product Line:
QO and Homeline Load Center

Environment:
Main Breaker Filler Plate

Cause:
Installation

Resolution:
The Low Amp(100-125Amp Max.) QO(Single phase ONLY) and Homeline load centers that use a QOM1 main breaker will use the filler plate part number QOM1FP.

The filler plate, QOM1FP is used on  the 100-125Amp load centers to fill the Main Breaker Opening for a QOM1 main circuit breaker.
The attached video is ONLY to supplement the INSTRUCTIONS that come with the kit. PLEASE make sure to read the instructions and all the below Safety Information that is located in the instructions BEFORE working on any electrical equipment.
A PDF copy of the complete instructions is attached below the video.


Make sure to turn OFF ALL Power supplying the equipment and verify the power is OFF using a properly rated voltage sensing device, BEFORE working on or with electrical equipment. 
1) Once all Safety steps are followed, begin the installation of the Main breaker opening filler plate by following the instructions.
2) Install the filler plate (A) from the front of cover (B) by pressing into place as shown
NOTE: PLEASE READ ALL INSTRUCTIONS AND SAFETY INFORMATION THAT COME WITH THE KIT AND NEVER WORK ON ENERGIZED EQUIPMENT.

PLACE VIDEO HERE.
Was this helpful?
What can we do to improve the information ?