Technical FAQs

Ask a Question

Video: How is a GV2 manual starter removed from the DIN rail ?

What is the proper procedure to follow when removing a GV manual starter from DIN rail?

Product Line:
IEC Manual Starters

TeSys GV-Line

Product Maintenance

To remove a GV manual starter from DIN rail the following steps must be followed while facing the front of the device where the terminal markings can be read.

1. With both hands, grip both the sides of the device placing the finger-tips over the top and thumb-tips underneath.

2. Firmly press the device downward towards the floor.

3. While firmly pressing the contactor downward towards the floor, pull the bottom end of the contactor outward, away from the DIN rail.

Was this helpful?
What can we do to improve the information ?