Technical FAQs

Ask a Question

What are the repair parts for the DTU363DS, series F6 (may be shown as F06)?

Issue:
Design Repair parts

Product Line:
Double Throw Safety Switch

Environment:
Repair parts

Cause:
Maintenance

Resolution:


The repair parts for the DTU363DS, series F6 (F06) are as follows. No other parts are available.
-Line Base - 4056624750 (one each upper and lower. Order arc suppressor, load lugs, and wire assembly separately).
-Line Base mounting screws - 4020515101 (requires 3 per line base).
-Arc Suppressor Assembly - 4056635550 (requires 1 per line base).
-Arc Suppressor mounting screw - 4020514501 (requires 1 per arc suppressor).
-Wire Assembly- 4056780050 (For A & B phase only. Includes cable factory connected mechanical lug at one end and at other end a crimped connector. Use mounting screws of line and load lugs.)
-Wire assembly-4056780051 (For C phase only. Includes cable factory connected mechanical lug at one end and at the other end a crimped connector. Use mounting screws of line and load lugs)
-Line and Load Lug Assembly - 4025101851(requires 6 lugs total, 3 per base assembly)
-Line and Load Lug mounting screw - 4020514202(requires one per lug)
-Ground Lug(s) - 4025101851 (per lug).
-Ground Lug mounting screw - 4020513503 (one per ground lug)
-Switch Mechanism - 4056646950 (each for upper and lower).
-Linkage Assembly - 4056665350 (links together upper and lower switch mechanisms).
-Linkage Assembly mounting screws that go into the side of the enclosure- 2194900001 (requires 3) Also replace the mounting screw rubber gaskets.
-Linkage Assembly mounting screw rubber Gaskets - 4050322802 (3 total required)
-Linkage Assembly mounting screw that go into the back mounting pan inside the switch - 2142217101 (4 required, no gaskets required)
-Handle - 4056688850
-Lockplate - 4056689501
-Lockplate mounting screws - 2194900001 (requires 2 and requires rubber gasket)
-Lockplate mounting screw rubber gasket - 4050322802



 
Was this helpful?
What can we do to improve the information ?