Lexium 52 & Motors
Stand alone servo drives and servo motors for PacDrive 3
Stand alone servo drives from 0.4 and 7 kW for PacDrive based automation solutions
FeaturesIn a conventional stand-alone design with integrated 3-phase power supply, Lexium 52 series servo drives are particularly well suited for economical configuration of servo drive solutions with self-contained single axes. The drives communicate via Sercos with the PacDrive 3 controller and offer embedded digital I/O. They are available in five different power levels, ranging from 1.5 to 24 A continuous current and 6 to 72 A peak current.
Lexium 52 stand alone servo drives can be controlled with all PacDrive LMC motion controllers of the Eco and Pro/Pro 2 Eco series. They match in particular with the smaller PacDrive LMC Eco controllers, when only few servo axes are required. Lexium 52 servo drives are all equipped with electronic name plates, so the controller recognizes the drives and configures them automatically.
Dynamic, highly efficient servo motors form the basis for servo solutions with Lexium 52. The Lexium SH3, MH3, and the SHS stainless steel servo motors cover a wide range of performance and flange sizes. All motors are equipped with electronic name plates, which is making them an integral component of the PacDrive 3 automation system, too.
The Lexium 52 servo drive offer increases machine performance due to the following characteristics :
• Power ratings between 0.4 and 7 kW (0.536 and 9.383 hp)
• Overload capacity: high peak current (up to 4 times the continuous current)
• Increases the range of movement
• Power density: the compact size of the servo drives offers maximum efficiency in a small space
• Compliance with electromagnetic compatibility (EMC) requirements
Hardwired invert enable safety input (STO), internal braking resistor and internal EMC-filter are making Lexium 52 a ready-to-use-solution. With an option concept an individual drive solutions can be created :
• External braking resistors, when the servo motor has to be braked frequently
• Additional EMC input filters to reduce conducted emissions on the line supply below the limits of standard IEC/EN 61800-3 edition 2, category C2 or C3.
• Line chokes for improved protection against overvoltages/ to reduce harmonic distortion of the current
BenefitsAs it is a stand-alone servo drive concept, Lexium 52 provides an ideal counter balance to the Lexium 62 multi axis servo system, making the PacDrive system to one of the most scalable and flexible motion control solutions available on the market. Lexium 52 is the pillar for economical automation of PacDrive-based solutions with few axes.
With side-by-side mounting and high power density Lexium 52 servo drives provide maximum power with minimum cabinet space. Electronic name plates, color-coded plug-in connectors, easily accessible on the front panel or on top of the servo drives all make maintenance quick and less expensive. Integrated safety functions reduce design times and make it easier to comply with safety standards.
Reach UsHave a question, complaint or is there some feedback you’d like to send us to make your experience with Schneider Electric better? Contact an Expert
Where to BuyA simple tool to locate easily your nearest Schneider Electric distributor Find a distributor
FAQ'sStart here for access to our Knowledge Base to get answers to over one hundred thousand questions online in seconds. View them now