Canada

Welcome to the Schneider Electric Website

Welcome to our website.

You can choose another country to view available products or go to our Global website for company information.

Choose another country or region

Schneider Eletric

View all Altivar 312

Altivar 312 - ATV312HU55N4

Variable speed drives

Schneider Eletric
View all Altivar 312
Altivar 312 - ATV312HU55N4
Variable speed drives

variable speed drive ATV312 - 5.5kW - 15kVA - 232W - 380..500 V- 3-phase supply

Show more characteristics >
Buy online
No online offers found
Add to My Products Remove from My Products

  • Main
    range of product
    Altivar 312
    product or component type
    Variable speed drive
    product destination
    Asynchronous motors
    product specific application
    Simple machine
    assembly style
    With heat sink
    component name
    ATV312
    motor power kW
    5.5 kW
    motor power hp
    7.5 hp
    [Us] rated supply voltage
    380...500 V (- 15...10 %)
    supply frequency
    50...60 Hz (- 5...5 %)
    Phase
    3 phases
    line current
    21.9 Afor 380 V, 22 kA
    16.5 Afor 500 V
    EMC filter
    Integrated
    apparent power
    15 kVA
    maximum transient current
    21.5 Afor 60 s
    power dissipation in W
    232 W at nominal load
    speed range
    1...50
    asynchronous motor control profile
    Factory set : constant torque
    Sensorless flux vector control with PWM type motor control signal
    electrical connection
    L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.02 in² (16 mm²) AWG 6
    Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0 in² (2.5 mm²) AWG 14
    supply
    Internal supply for logic inputsat 19...30 V, <= 100 mAfor overload and short-circuit protection
    Internal supply for reference potentiometer (2.2 to 10 kOhm)at 10...10.8 V, <= 10 mAfor overload and short-circuit protection
    communication port protocol
    CANopen
    Modbus
    IP degree of protection
    IP20 on upper part without cover plate
    IP21 on connection terminals
    IP31 on upper part
    IP41 on upper part
    option card
    CANopen daisy chain communication card
    DeviceNet communication card
    Fipio communication card
    Modbus TCP communication card
    Profibus DP communication card
    Complementary
    supply voltage limits
    323...550 V
    network frequency
    47.5...63 Hz
    prospective line Isc
    22 kA
    continuous output current
    14.3 Aat 4 kHz
    output frequency
    0...500 kHz
    nominal switching frequency
    4 kHz
    switching frequency
    2...16 kHz adjustable
    transient overtorque
    170...200 % of nominal motor torque
    braking torque
    100 % with braking resistor continuously
    150 % without braking resistor
    150 % with braking resistor for 60 s
    regulation loop
    Frequency PI regulator
    motor slip compensation
    Adjustable
    Automatic whatever the load
    Suppressable
    output voltage
    <= power supply voltage
    tightening torque
    22.12 lbf.in (2.5 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-
    5.31 lbf.in (0.6 N.m) Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6
    insulation
    Electrical between power and control
    analogue input number
    3
    analogue input type
    AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance 30000 Ohm
    AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance 30000 Ohm
    AI3 configurable current 0...20 mA, impedance 250 Ohm
    sampling duration
    AI1, AI2, AI3 8 ms analog
    LI1...LI6 4 ms discrete
    response time
    AOV, AOC 8 ms analog
    R1A, R1B, R1C, R2A, R2B 8 ms discrete
    linearity error
    +/- 0.2 % output
    analogue output number
    1
    analogue output type
    AOC configurable current 0...20 mA, impedance 800 Ohm, resolution 8 bits
    AOV configurable voltage 0...10 V, impedance 470 Ohm, resolution 8 bits
    discrete input logic
    (LI1...LI4) logic input not wired, < 13 V (state 1)
    (LI1...LI6) negative logic (source), > 19 V (state 0)
    (LI1...LI6) positive logic (source), < 5 V (state 0), > 11 V (state 1)
    discrete output number
    2
    discrete output type
    (R1A, R1B, R1C) configurable relay logic 1 NO + 1 NC, electrical durability 100000 cycles
    (R2A, R2B) configurable relay logic NC, electrical durability 100000 cycles
    minimum switching current
    R1-R2 10 mAat 5 V DC
    maximum switching current
    R1-R2 on inductive load, 2 A at 250 V AC, (cos phi = 0.4, and L/R = 7 ms)
    R1-R2 on inductive load, 2 A at 30 V DC, (cos phi = 0.4, and L/R = 7 ms)
    R1-R2 on resistive load, 5 A at 250 V AC, (cos phi = 1, and L/R = 0 ms)
    R1-R2 on resistive load, 5 A at 30 V DC, (cos phi = 1, and L/R = 0 ms)
    discrete input number
    6
    discrete input type
    (LI1...LI6) programmable, 24 V 0...100 mA with PLC, impedance 3500 Ohm
    acceleration and deceleration ramps
    Linear adjustable separately from 0.1 to 999.9 s
    S, U or customized
    braking to standstill
    By DC injection
    protection type
    Input phase breaks drive
    Line supply overvoltage and undervoltage safety circuits drive
    Line supply phase loss safety function, for three phases supply drive
    Motor phase breaks drive
    Overcurrent between output phases and earth (on power up only) drive
    Overheating protection drive
    Short-circuit between motor phases drive
    Thermal protection motor
    insulation resistance
    >= 500 mOhmat 500 V DC for 1 minute
    local signalling
    1 LED red drive voltage
    Four 7-segment display units CANopen bus status
    time constant
    5 ms for reference change
    frequency resolution
    Analog input 0.1...100 Hz
    Display unit 0.1 Hz
    connector type
    1 RJ45 Modbus/CANopen
    physical interface
    RS485 multidrop serial link
    transmission frame
    RTU
    transmission rate
    10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
    4800, 9600 or 19200 bps Modbus
    number of addresses
    1...247 Modbus
    1...127 CANopen
    number of drive
    127 CANopen
    31 Modbus
    marking
    CE
    operating position
    Vertical +/- 10 degree
    outer dimension
    232 x 180 x 170 mm
    300 x 210 x 170 mm
    402 x 239 x 192 mm
    442 x 239 x 192 mm
    height
    9.13 in (232 mm)
    width
    7.09 in (180 mm)
    depth
    6.77 in (172 mm)
    product weight
    14.33 lb(US) (6.5 kg)
    Environment
    dielectric strength
    2410 V DC between earth and power terminals
    3400 V AC between control and power terminals
    electromagnetic compatibility
    Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
    Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
    Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
    1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
    standards
    IEC 61800-3
    IEC 61800-5-1
    product certifications
    CSA
    C-Tick
    DNV
    GOST
    NOM
    UL
    pollution degree
    2
    protective treatment
    TC
    vibration resistance
    1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
    1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
    shock resistance
    15 gn 11 ms conforming to EN/IEC 60068-2-27
    relative humidity
    5...95 % without condensation conforming to IEC 60068-2-3
    5...95 % without dripping water conforming to IEC 60068-2-3
    ambient air temperature for storage
    -13...158 °F (-25...70 °C)
    ambient air temperature for operation
    14...122 °F (-10...50 °C) without derating with protective cover on top of the drive
    14...140 °F (-10...60 °C) with derating factor without protective cover on top of the drive
    operating altitude
    <= 3280.84 ft (1000 m) without derating
    3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    RoHS (date code: YYWW)
    REACh
    Product environmental profile
    Product end of life instructions
    Available
    Contractual warranty
    Warranty period
    18 months
  • Documents and Downloads

    Language
    • English
    • Spanish
    • French
    Software - Released
    Date
    Size
    Add to My Documents
    SoMove V2.6.5 (FDT Standalone)
    Date 19/06/18
    Size 234.4 MB
    Date 19/06/18
    Size 107.1 KB
    Catalog
    Date
    Size
    Add to My Documents
    Date 27/06/18
    Size 23.3 MB
    Date 21/06/18
    Size 3.7 MB
    User guide
    Date
    Size
    Add to My Documents
    Date 14/12/17
    Size 1.9 MB
    Date 14/12/17
    Size 2.8 MB
    Date 14/12/17
    Size 2.3 MB
    Date 09/03/15
    Size 3.7 MB
    Date 14/12/17
    Size 2 MB
    Date 21/09/17
    Size 210.6 KB
    Date 21/09/17
    Size 1.9 MB
    Date 18/08/16
    Size 1.6 MB
    Date 16/06/17
    Size 1.6 MB
    Date 13/12/17
    Size 1.8 MB
    Date 13/02/17
    Size 1.2 MB
    Data Bulletin
    Date
    Size
    Add to My Documents
    Date 03/02/17
    Size 672.9 KB
    Brochure
    Date
    Size
    Add to My Documents
    Date 13/12/17
    Size 459.6 KB
    Certificate
    Date
    Size
    Add to My Documents
    Date 19/06/18
    Size 527.5 KB
    Date 22/06/18
    Size 741.2 KB
    Date 27/04/18
    Size 599.1 KB
    Instruction Sheet
    Date
    Size
    Add to My Documents
    Date 06/09/18
    Size 1.1 MB
    Date 30/10/18
    Size 389.4 KB
    Date 30/10/18
    Size 675.9 KB
    Catalog Pages
    Date
    Size
    Add to My Documents
    Date 14/08/18
    Size 67.8 KB
    Marine certificate
    Date
    Size
    Add to My Documents
    Date 13/08/18
    Size 267.4 KB
    Product Environmental Profile
    Date
    Size
    Add to My Documents
    Date 27/03/18
    Size 1.1 MB
    Date 14/12/17
    Size 193.3 KB
    REACh Declaration
    Date
    Size
    Add to My Documents
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.