Main rangeTeSys product nameTeSys D product or component typeContactor device short nameLC1D contactor applicationMotor controlResistive load utilisation categoryAC-1AC-3AC-4 poles description3P power pole contact composition3 NO System Voltage<= 300 V DC power circuit<= 690 V AC 25...400 Hz power circuit [Ie] rated operational current80 A (<= 140 °F (60 °C)) at <= 440 V AC AC-1 power circuit65 A (<= 140 °F (60 °C)) at <= 440 V AC AC-3 power circuit motor power kW11 kW at 400 V AC 50/60 Hz AC-430 kW at 380...400 V AC 50/60 Hz AC-337 kW at 500 V AC 50/60 Hz AC-337 kW at 660...690 V AC 50/60 Hz AC-318.5 kW at 220...230 V AC 50/60 Hz AC-3 motor power HP (UL / CSA)40 hp at 460/480 V AC 50/60 Hz 3 phases motors5 hp at 115 V AC 50/60 Hz 1 phase motors10 hp at 230/240 V AC 50/60 Hz 1 phase motors20 hp at 200/208 V AC 50/60 Hz 3 phases motors20 hp at 230/240 V AC 50/60 Hz 3 phases motors50 hp at 575/600 V AC 50/60 Hz 3 phases motors control circuit typeAC 50/60 Hz [Uc] control circuit voltage230 V AC 50/60 Hz auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltageConforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current80 A at <= 140 °F (60 °C) power circuit10 A at <= 140 °F (60 °C) signalling circuit Irms rated making capacity1000 A at 440 V power circuit conforming to IEC 60947140 A AC signalling circuit conforming to IEC 60947-5-1250 A DC signalling circuit conforming to IEC 60947-5-1 rated breaking capacity1000 A at 440 V power circuit conforming to IEC 60947 [Icw] rated short-time withstand current100 A 1 s signalling circuit120 A 500 ms signalling circuit140 A 100 ms signalling circuit520 A <= 104 °F (40 °C) 10 s power circuit900 A <= 104 °F (40 °C) 1 s power circuit110 A <= 104 °F (40 °C) 10 min power circuit260 A <= 104 °F (40 °C) 1 min power circuit associated fuse rating125 A gG at <= 690 V coordination type 1 power circuit125 A gG at <= 690 V coordination type 2 power circuit10 A gG signalling circuit conforming to IEC 60947-5-1 average impedance1.5 mOhm at 50 Hz - Ith 80 A power circuit [Ui] rated insulation voltage600 V power circuit certifications CSA600 V power circuit certifications UL690 V power circuit conforming to IEC 60947-4-1690 V signalling circuit conforming to IEC 60947-1600 V signalling circuit certifications CSA600 V signalling circuit certifications UL electrical durability1.45 Mcycles 65 A AC-3 at Ue <= 440 V1.4 Mcycles 80 A AC-1 at Ue <= 440 V power dissipation per pole6.3 W AC-39.6 W AC-1 safety coverWith mounting supportPlateRail standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsCCCCSAGOSTUL connections - terminalsControl circuit: lugs-ring terminals - external diameter: 0.31 in (8 mm)Power circuit: lugs-ring terminals - external diameter: 0.65 in (16.5 mm) tightening torqueControl circuit: 15.04 lbf.in (1.7 N.m) - on lugs-ring terminals - with screwdriver flat Ø 6 mm screw : M3.5Control circuit: 15.04 lbf.in (1.7 N.m) - on lugs-ring terminals - with screwdriver Philips No 2 screw : M3.5Power circuit: 53.1 lbf.in (6 N.m) - on lugs-ring terminals hexagonal 0.39 in (10 mm) screw : M6 operating time12...26 ms closing4...19 ms opening safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability6 Mcycles operating rate3600 cyc/h at <= 140 °F (60 °C) Complementary coil technologyWithout built-in suppressor module control circuit voltage limits0.3...0.6 Uc drop-out at 140 °F (60 °C), AC 50/60 Hz0.8...1.1 Uc operational at 140 °F (60 °C), AC 50 Hz0.85...1.1 Uc operational at 140 °F (60 °C), AC 60 Hz inrush power in VA140 VA at 68 °F (20 °C) (cos ϕ 0.75) 60 Hz160 VA at 68 °F (20 °C) (cos ϕ 0.75) 50 Hz hold-in power consumption in VA13 VA at 68 °F (20 °C) (cos ϕ 0.3) 60 Hz15 VA at 68 °F (20 °C) (cos ϕ 0.3) 50 Hz heat dissipation4...5 W at 50/60 Hz auxiliary contacts typeType mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1Type mirror contact (1 NC) conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mA signalling circuit minimum switching voltage17 V signalling circuit non-overlap time1.5 ms on de-energisation (between NC and NO contact)1.5 ms on energisation (between NC and NO contact) insulation resistance> 10 MOhm signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation23...140 °F (-5...60 °C) ambient air temperature for storage-76...176 °F (-60...80 °C) permissible ambient air temperature around the device-40...158 °F (-40...70 °C) at Uc operating altitude9842.52 ft (3000 m) without derating in temperature fire resistance1562 °F (850 °C) conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open 2 Gn, 5...300 HzVibrations contactor closed 4 Gn, 5...300 HzShocks contactor open 10 Gn for 11 msShocks contactor closed 15 Gn for 11 ms height4.8 in (122 mm) width2.17 in (55 mm) depth4.72 in (120 mm) product weight1.9 lb(US) (0.86 kg) Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
A Tour of Schneider Electric's Modicon M580 ePACDave Sutton of Schneider Electric gives a guided tour of the features, architecture and benefits of the company's revolutionary ethernet Programmable Automation Controller - ePAC. Learn more on Modicon M580