motion servo drive - Lexium 32-single phase supply voltage 115/230V - 0.8/1.6kWShow more characteristics >
Main range of productLexium 32 product or component typeMotion servo drive device short nameLXM32S format of the driveBook PhaseSingle phase [Us] rated supply voltage100...120 V (- 15...10 %)200...240 V (- 15...10 %) supply voltage limits170...264 V85...132 V supply frequency50/60 Hz (- 5...5 %) network frequency47.5...63 Hz EMC filterIntegrated continuous output current10 A (f = 8 kHz) output current 3s peak15 A at 115 V for 5 s maximum continuous power800 W at 115 V nominal power0.8 kW at 115 V (f = 8 kHz) line current12.9 A, THDI of 135 % at 115 V, without line choke9.9 A, THDI of 72 % at 115 V, with external line choke of 2 mH14.1 A, THDI of 86 % at 230 V, with external line choke of 2 mH Complementary switching frequency8 kHz overvoltage categoryIII leakage current<= 30 mA output voltage<= power supply voltage electrical isolationBetween power and control type of cableSingle-strand IEC cable (for θ = 122 °F (50 °C)) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR electrical connectionTerminal cable 3 mm² AWG 12 (CN8) tightening torque4.42 lbf.in (0.5 N.m) (CN8) discrete input number2 capture discrete input typeCapture (CAP) sampling duration0.25 ms discrete input voltage24 V DC capture discrete input logicPositive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 response time<= 5 ms (compliment of STO_A, compliment of STO_B) discrete output number3 discrete output typeLogic (DO) 24 V DC discrete output voltage<= 30 V DC discrete output logicPositive or negative (DO) conforming to EN/IEC 61131-2 contact bounce time<= 1 ms (compliment of STO_A, compliment of STO_B) braking current50 mA response time on output250 µs (DO) discrete safety functionSTO (safe torque off), integrated safety levelSIL 3 conforming to EN/IEC 61508 communication interfaceIntegrated SERCOS IIIIntegrated Modbus connector typeRJ45 (labelled CN7) :Modbus commissioning port2-wire RS485 multidrop Modbus transmission rate9600, 19200, 38400 bps for bus length of 40 m Modbus number of addressesModbus status LED1 LED (red) servo drive voltage signalling functionDisplay of faults in 7 segments markingCE operating positionVertical +/- 10 degree product compatibilityServo motor BMH (2.76 in (70 mm), 2 motor stacks) width2.68 in (68 mm) height10.63 in (270 mm) depth9.33 in (237 mm) product weight4.63 lb(US) (2.1 kg) Environment electromagnetic compatibilityConducted EMC conforming to EN 55011 class A group 1 standardsEN/IEC 61800-3 product certificationsCSA IP degree of protectionIP20 conforming to EN/IEC 60529 vibration resistance1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gn 11 ms conforming to EN/IEC 60028-2-27 pollution degree2 conforming to EN/IEC 61800-5-1 environmental characteristicClasses 3C1 conforming to IEC 60721-3-3 relative humidityClass 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 ambient air temperature for operation32...122 °F (0...50 °C) conforming to UL ambient air temperature for storage-13...158 °F (-25...70 °C) type of coolingIntegrated fan operating altitude<= 3280.84 ft (1000 m) without derating Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructionsAvailable Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsFirmware - ReleasedSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsLexium 32 Servo DriveDimensions
Mounting and ClearanceLexium 32 Motion Control Servo DrivesMounting Recommendations
LXM32•U45M2, •U90M2 and LXM32•U60N4 servo drives are cooled by natural convection. LXM32•D18M2, •D30M2, LXM32 •D12N4, •D18N4, •D30N4 and •D72N4servo drives have an integrated fan.
When installing the servo drive in the enclosure, follow the instructions below with regard to the temperature and protection index:
Provide sufficient cooling of the servo drive
Do not mount the servo drive near heat sources
Do not mount the servo drive on flammable materials
Do not heat the servo drive cooling air by currents of hot air from other equipment and components, for example from an external braking resistor
Mount the servo drive vertically (± 10%)
If the servo drive is used above its thermal limits, control stops due to overtemperature
NOTE: For cables that are connected via the underside of the servo drive, a free space ≥ 200 mm/7.87 in. is required under the unit to comply with the bending radius of the connection cables.
Instructions to be followed
d ≥ 0 mm
+ 50°C…+ 60°C
d ≥ 0 mm
Reduce the output current by 2.2% per °C above 50°C
NOTE: Do not use insulated enclosures, as they have a poor level of conductivity.Recommendations for Mounting in an Enclosure
To ensure good air circulation in the servo drive:
(1)Natural convection(2)Forced ventilation
Fit ventilation grilles on the enclosure.
Ensure that ventilation is adequate, otherwise install a forced ventilation unit with a filter.
Mounting in Metal Enclosure (IP 54 Degree of Protection)
Any apertures and/or fans must provide a flow rate at least equal to that of the servo drive fans (refer to characteristics).
Use special filters with IP 54 protection.
The servo drive must be mounted in a dust and damp proof enclosure in certain environmental conditions, such as dust, corrosive gases, high humidity with risk of condensation and dripping water, splashing liquid, etc. In these cases, Lexium 32 servo drives can be installed in an enclosure where the internal temperature must not exceed 60°C.