Main range of productOsiSense XM product or component typeElectronic pressure sensors device short nameZMLP Complementary display range-14.5...6000 [Us] rated supply voltage24 V DC SELV, voltage limit: 17...33 V current consumption<= 50 mA electrical connectionM12 female connector with 2 pinsM12 male connector with 4 pins type of output signalDiscrete discrete output typePNP solid state - 2 NO/NC programmable switching functionHysteresis maximum switching current200 mA voltage drop<= 2 V adjustable range of switching point on rising pressure5...98 % of selected display range minimum differential travel10 % of selected display range markingCE front materialPolyester housing materialPBT Valox operating positionAny position protection typeOverload protectionOvervoltage protectionReverse polarityShort-circuit protection response time on output<= 3 ms discrete output display type4 digits 7 segments local signalling2 LEDs yellow light ON when switch is actuated response time300 ms delay first up<= 100 ms accuracy<= - 0.1 % of the measuring range measurement accuracy<= 1 % of the measuring range display accuracy<= 1 % of the measuring range mechanical durability>= 10000000 cycles depth1.65 in (42 mm) height3.03 in (77 mm) width1.61 in (41 mm) product weight0.23 lb(US) (0.103 kg) [Uimp] rated impulse withstand voltage0.5 kV DC Environment product certificationscULusEAC standardsEN/IEC 61000-6-2EN/IEC 61000-6-4UL 508 ambient air temperature for operation-13...158 °F (-25...70 °C) ambient air temperature for storage-22...176 °F (-30...80 °C) IP degree of protectionIP65 conforming to EN/IEC 60529IP67 conforming to EN/IEC 60529IP69K conforming to DIN 40050 vibration resistance5 gn at 10...2000 Hz conforming to EN/IEC 60068-2-6 shock resistance25 gn conforming to EN/IEC 60068-2-27 electromagnetic compatibilityImmunity to conducted RF disturbances at 10 V, 0.15...80 MHz conforming to EN/IEC 61000-4-6Surge immunity test at 1 kV conforming to EN/IEC 61000-4-5Electrical fast transient/burst immunity test at 2 kV conforming to EN/IEC 61000-4-4Susceptibility to electromagnetic fields at 10 V/m, 80...2000 MHz conforming to EN/IEC 61000-4-3Electrostatic discharge immunity test at 8 kV air, 4 kV contact conforming to EN/IEC 61000-4-2 Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD files for ZMLPA2P0SH: 2 discrete outputs, Hysteresis mode, connector M12 (Version 1.0)CertificateSizeAdd to My DocumentsInstruction SheetSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionsDimensionsSwitch with Metal Bracket for Fixing HorizontallyDimensionsSwitch with Metal Bracket for Fixing Vertically or on an Inlet Pipe
Connections and SchemaConnections and SchemaOutput M12 Male Connector Wiring(1)Out 1(2)Out 2Connections and SchemaInput M12 Female Connector Wiring(1)l in = 4-20 mA
Performance CurvesTwo Switching Outputs Description. Hysteresis Mode
The hysteresis switching mode is typically used for the pumping applicationsX :TimeY :Pressure(1)Output(2)Fixed hysteresis = 10% of the selected display rangeSP1/SP2 :Set points (adjustable from 11% to 98% nominal pressure)